Sony VPL-SW636C Operating Instructions Manual page 78

VPL-SW636C only
Symptoms
PC Free Interactive
function does not work.
Cannot draw with the
PC Free Interactive
function.
Cannot use Mouse
Mode.
Cannot use Interactive
Presentation Utility 2.
Cannot save the
whiteboard data.
The correct time is not
displayed on the clock
display.
Cannot retrieve the
whiteboard data saved in
the projector.
The positions of the
computer cursor and pen
do not match.
Even though "Lamp
Mode" is set to "Auto,"
it does not work.
Even though "With No
Input" is set to "Lamp
Cutoff" or "Standby," it
does not work.
78
Troubleshooting
Remedy
Check if "Interactive Mode" is set to "PC Free."
Hide the menu.
Check if the warning, notification, or other messages appear.
Perform calibration with "Calibration" in the Function
menu.
Check if the projector and the computer are connected with
a USB cable.
Check if "Interactive Mode" is set to "PC Interactive."
Check that Interactive Presentation Utility 2 is not running.
Check if the projector and computer are connected with a
USB cable.
Check if "Interactive Mode" is set to "PC Interactive."
Check that Interactive Presentation Utility 2 is running.
If the capacity of the projector is 500 KB or less, no more
data can be saved. Save the necessary data to the computer
and delete unnecessary files from the projector.
If the projector is turned off for a long time, or not operated
in standby mode for a long time with"Standby Mode"set to
"Low," the clock display may be restored to the factory
setting. In this case, click the clock display icon to set the
clock again.
Check if the projector and computer are connected with a
USB cable.
Check if "Interactive Mode" is set to "OFF(Data Export)."
Select "Auto" or "Manual (Main)" in "Calibration," and
perform calibration.
Adjust "Pitch"and "Shift" of the screen.
If the resolution of the image signals of the computer and
"Signal Type" on the Information menu do not match, the
positions of pen tip and the computer cursor may not match.
In this case, set the resolution of the image signals of the
computer to match the one of "Signal Type."
If "Interactive Mode" is set to "PC Free," and "Lamp Mode"
is set to "Auto" at the same time, "Lamp Mode" will
automatically become equivalent to "Standard." Set
"Interactive Mode" to other than "PC Free" if necessary.
When "Interactive Mode" is set to "PC Free," "With No
Input" will automatically become equivalent to "Off." Set
"Interactive Mode" to other than "PC Free" if necessary.
Page
27
21
–
27
10
27
48, 50
10
27
48, 50
57
31, 57
10
27
27
24
34
27
27, 31