4
Connecting the plug-in connections and earth cables
.06
Fig. 4 - 06
● Plug in all connectors to control unit 1 according to their description (see chapter
6 Circuit Diagrams).
● Insert plug 2 from the adapter cable to bush X 3.
● Connect the motor to the "Motor" plug and the synchronizer to the "Extern" plug.
● Attach the following ground cables in order to discharge static electricity.
● Securely attach ground cable from sewing head to ground point A.
● Securely attach ground cable 2 from the motor to ground point B.
● Use a ground cable to connect ground point C and ground point A.
● Securely attach ground cable from the main switch to ground point A.
1
Attention
Plugging in the connector incorrectly can damage the control unit!
B
A
C
Installation
3
M6x16
2
17