Using Your Removable Handheld Steamer With Window Squeegee; Using Your Removable Handheld Steamer With Flat Scrubber - Shark S3901UKL Owner's Manual

Hide thumbs Also See for S3901UKL:
Table of Contents

Advertisement

Using Your Removable Handheld Steamer
with Window Squeegee
Cleaning Tip: To use the window squeegee, work with the vapor jet down using top to
bottom movements. To do this without leaving streaks, use lateral movements from the
top to the bottom of the surface.
fig. 23
CAUTION: Always avoid any sudden changes
in temperature to prevent breakage of cracks in
windows.
1
Attach the Window Squeegee by snapping into
the handle of the Accessory Hose. (fig. 23)
2
Select either DUST, MOP or SCRUB mode by
pressing the ON/STEAM SETTING button and
wait until the selected setting indicator light
turns solid blue. Hold down the steam trigger to
start steaming. (fig. 24)
14
www.lakeland.co.uk
fig. 24
3
To remove the Window Squeegee, press and
hold down the Accessory release button. Then
slide out the Window Squeegee.
CAUTION: Do not press the steam trigger
while attaching or removing the Window
Squeegee.
Using Your Removable Handheld Steamer
with Flat Scrubber
Cleaning Tip: The Flat Scrubber is designed for cleaning a variety of surfaces and is
exceptional on those that are large and flat including counter tops, table tops, walls
mirrors, windows, stairs, shelves and other similar surfaces. Super absorbent bonnet
loosens, lifts, and locks in dirt and grime while sanitising at the same time.
fig. 26
fig. 25
1
To attach the All-Purpose Scrubber Pad, place
the pad exterior side down on a flat surface
(lavender tab indicates the bottom of the pad)
and insert the top of the Flat Scrubber Tool into
the top portion of the pad and then pull the pad
over each side of the back edge.
2
Press the Flat Scrubber Tool onto the Accessory
Hose until it clicks into place. (fig. 25)
3
Select either DUST, MOP or SCRUB mode by
pressing the ON/STEAM SETTING button and
wait until the selected setting indicator light
turns solid blue. Hold down the steam trigger to
start steaming. (fig. 26)
4
To remove the Flat Scrubber Tool, press and hold
down the Accessory Hose release button. Then
slide out the Flat Scrubber Tool. (fig. 27)
fig. 27
CAUTION: Do not press the steam trigger
while attaching or removing the Flat Scrubber
Tool.
CAUTION: Do not use the Flat Scrubber Tool
without the All-Purpose Scrubber Pad attached.
www.lakeland.co.uk
15

Advertisement

Table of Contents
loading

Table of Contents