GE JEBC200B Use And Care Manual page 23

Example:
Step 1: Place covered food in oven.
Touch AUTO COOK pad. "ENTER
COOK CODE" flashes on display.
AUTO
COOK
n
Step 2: Touch number pad for desired
code. "CODE 2" shows on the display.
START
Touch START.
How to Adjust Auto Cook Codes to Suit Your Taste
By simply adding a 1 after any Auto Cook code
number, you can set the oven to cook for 20Yo less
time than the code would regularly provide.
For example, if code 4 cooks your chicken more done
than you like it, set code 41 next time and you'll get
20% shorter cooking time.
Example:
n 'tep
: Touch AUTO COOK pad.
AUTO
COOK
Step 2: Touch number pads 4 and
1 in that order. "AUTO CODE 4"
shows on the display.
CODE
COOK
If you want a longer cooking time than a code
provides, add a 9 after the code.
For the chicken in the example at left, code 49 would
provide 20% longer cooking time than the regular
code 4 would provide.
Step 3: Touch START. "AUTO" shows
on display. DO NOT OPEN DOOR until
START
first oven signal, then rotate dish 1/2
turn if necessary. Close door and touch
START to finish cooking.
Word "AUTO" shows
on display, indicating
steam sensor is activated.
DO NOT OPEN DOOR.
OPENING DOOR MAY
AFFECT COO~NG
PERFORMANCE.
Step 3: Beep sounds
when steam is sensed
and "AUTO" is
replaced by cook time.
Rotate or stir food, if
necessary. When done,
oven beeps every minute
until door is opened or
23