Network Connection - palmOne TREOTM TreoTM 650 Using Manual

Become familiar with low
coverage areas where you
live, commute, work, and
play. Then you will know
when to expect signal
strength issues.

172 :: Network connection

Network connection
Signal strength is weak
1. If you're standing, move about 10 feet in any direction.
2. If you're in a building, move near a window. Open any metal blinds.
3. If you're in a building, move outdoors or to a more open area.
4. If you're outdoors, move away from large buildings, trees, or electrical wires.
5. If you're in a vehicle, move your Treo level with a window.
Treo won't connect to the mobile network
1. Try the suggestions above for weak signals.
2. Turn off your phone and turn it on again (see "Turning your phone on and off" on
page 15).
3. Remove the SIM card and re-insert it (see "Inserting the SIM card" on page 14).
4. Perform a soft reset (see "Performing a soft reset" on page 168).
Treo hangs up when I hold it to my ear
You may be accidentally pressing the onscreen Hang Up button with your cheek.
Try holding the phone so your face doesn't press against the screen. If this is not
convenient, you may want to disable the screen's touch-sensitive feature during
active calls (see "Using Auto-Keyguard and touchscreen lockout" on page 157).
Treo seems to turn off by itself
If a system error and reset occur, Treo automatically turns the phone on if it was on
before the reset. However, if Treo can't determine if your phone was on before the
reset, it does not automatically turn on the phone (see "Turning your phone on and off"
on page 15).