palmOne TREOTM TreoTM 650 Using Manual page 33

Connecting your Treo to your computer
1. Plug the AC charger into a wall outlet. If necessary connect an adapter.
2. Plug the USB sync cable into an available USB port or a powered USB hub on
your computer.
3. Connect the sync cable to the Multi-connector on the bottom of your Treo with
®
the HotSync button facing up. Do not press the HotSync button until you are
instructed to do so.
4. Connect the charger cable to the Multi-connector on the sync cable.
A. USB sync cable
B. HotSync button
B
A
For best performance, plug
your sync cable directly
into a USB port on your
computer. If you use a USB
hub, make sure it is a
powered hub.
Setting up your computer :: 31