Pager Operation - Icom IC-T3H Instruction Manuals

Pager operation

D Calling a specific station
q Program the desired code channel in advance (p. 40).
w Set the operating frequency.
• Set the AF and squelch to the desired level as in normal operation.
e Push [ •
OPTION
• Pager mode is selected.
• 100 MHz digit shows "P."
r Select the desired transmit code channel:
Push [8•
SET
Rotate [VOL] to select the desired code channel.
Push [#•
ENT
t Push [PTT] to transmit the pager code.
y Wait for an answer back.
• When the transceiver receives an answer back code, the function
display shows the other member's ID or group code.
u After confirming a connection push [ •
pushed to select the code squelch operation, or repeat the pre-
vious key operation again to select non-selective calling system.
• DO NOT push any digit keys while code channels C0 to C6 are dis-
played, or code channel contents will be changed.
i Communicate with the other party as normal: push [PTT] to
transmit; release to receive.
] after [A•
FUNC
] after [A• ] is pushed.
FUNC
] to return to previous condition.
PAGER/CODE SQUELCH
Optional UT-108 required
] is pushed.
OPTION
10
F
TX
MR
] after [A• ] is
FUNC
42