Fueling - Husqvarna T540 XP II Operator's Manual

Fueling

WARNING! Taking the following
!
precautions, will lessen the risk of fire:
Always stop the engine and let it cool for
a few minutes before refuelling.
Do not smoke and do not place any hot
objects in the vicinity of fuel.
When refuelling, open the fuel cap slowly
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refuelling.
Always move the machine away from the
refuelling area and source before
starting.
Clean the area around the fuel cap. Clean the fuel and
chain oil tanks regularly. The fuel filter must be replaced
at least once a year. Contamination in the tanks causes
malfunction. Make sure the fuel is well mixed by shaking
the container before refuelling. The capacities of the chain
oil tank and fuel tank are carefully matched. You should
therefore always fill the chain oil tank and fuel tank at the
same time.
WARNING! Fuel and fuel vapour are
!
highly flammable. Take care when
handling fuel and chain oil. Be aware of
the risks of fire, explosion and those
associated with inhalation.
Removing fuel cap and chain oil cap
• Press down on the textured area of the flip lever and
lift to an upright position.
FUEL HANDLING
• Loosen the cap by turning it counterclockwise.
• Remove the cap.
Replacing fuel cap and chain oil cap
• Insert the cap with the flip lever in an upright position.
• Tighten the cap securely by turning it clockwise.
• Fold the flip lever down.
IMPORTANT! Always replace a damaged cap.
–
English 21