Advertisement

Plantronics DA80 Audio
Processor
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Plantronics DA80

  • Page 1 Plantronics DA80 Audio Processor User Guide...
  • Page 2: Table Of Contents

    Contents Welcome Power Plantronics Spokes Software Install Plantronics Hub Start Hub Hub Tabs Use your headset Answer, end and make calls with Spokes Put a call on hold Adjust volume Mute a call Troubleshooting...
  • Page 3: Welcome

    Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Plantronics DA80 Audio Processor. Please refer to the safety instructions for important product safety information prior to installation or use of the product.
  • Page 4: Power

    Power Powering the USB Audio Processor The USB Audio Processor is automatically powered on upon inserting into the USB port of the computer.
  • Page 5: Plantronics Spokes Software

    To start Hub, click Start > Programs > Plantronics > Hub Hub Tabs When you first start Plantronics Hub the About Tab will be displayed. If you have at least one Plantronics device connected to your computer using a USB connector you will see an image of your device along with some information about that device.
  • Page 6 About Tab Provides information about your connected device or devices; switch between devices or set primary device (pull down menu, upper left, appears when multiple devices present). Updates tab Check for device firmware and Hub software updates; get information about updates when available, install as necessary Settings tab Configure available settings for your device or devices, Hub software...
  • Page 7: Use Your Headset

    To answer or end a call: press the answer/end button For softphones not compatible with Spokes: check the Spokes compatibility list at www.plantronics.com/media/downloads/SoftphoneCompatibility.pdf for the most current information. If your softphone is not currently supported by Spokes, answer/end via pressing the call button on the headset will not function;...
  • Page 8: Troubleshooting

    I cannot hear the caller. The USB audio processor is not set as the default audio device. Use the audio setting in Windows under Sounds and Audio Devices to select DA80 as the audio device. Listening volume is too low. Press the volume up button on the headset.
  • Page 9 Plantronics, Inc. Plantronics, Plantronics Explorer and Simply Smarter Communications are trademarks of Plantronics, Inc. registered in the US and other countries, and Explorer is a trademark of Plantronics, Inc. Bluetooth trademarks are owned by Bluetooth SIG Inc., any use by Plantronics, Inc. is under license.

Table of Contents