Steering Wheel Replacement - GMC G Service Manual

3B4-10 STEERING COLUMN
! «
n
'
C
C. 346.7 mm (13.64 inches) R/V MODEL (Tilt
Column)
D. 72 mm (2.8 inches) R/V MODEL (Standard
Column-Column Shift)
E. 353 mm (14 inches) R/V MODEL (Standard
Column-Floor Shift)
F. 81.7 mm (3.21 inches) G-MODEL (Tilt Col­
umn-Column Shift)
G. 144.9 mm (5.70 inches) G-MODEL (Tilt Col-
umn-4 Speed)
H. 192 mm (7.5 inches) G-MODEL (Standard
Column-Column Shift)
J. 80 mm (3.1 inches) G-MODEL (Tilt Column-
Floor Shift)
~ E
j
f
K. Inspect for sheared injected plastic in the
shift tube.
L. Inspect for sheared injected plastic in the
steering shaft.
Figure 3 —■ Steering Column Collapse Inspection
t
-A
E
Figure 2 — Steering Column Collapse inspection
.K
2
B_ Q7382
bH
< G
J L -------------
\ l---------------
H
n -------------
\ l--------------

STEERING WHEEL REPLACEMENT

M Remove or Disconnect (Figure 4)
Tool Required:
J 1859-03 Steering Wheel Puller
1. Negative battery cable.
2. Horn button cap.
3. Retainer and steering wheel nut.
4. Horn lead assembly (some models).
• Mark the relationship of the steering wheel to the
steering shaft.
5. Steering wheel. Use J 1859-03 (figure 4). Do not
hammer on the puller, or damage could result to the
steering column.
r
r
L00663