P-Model Bumpers; Front Bumper Replacement (With Rpo Fs3 Front Axle) - GMC G Service Manual

2A-16 FRAME AND BUMPERS
Figure 19 — Utility Vehicle Weight Distribution Hitch
Components
FRONT BUMPER REPLACEMENT
Remove or Disconnect (Figures 20 and 21)
1. Brace to frame nuts (203), spring washers (202),
washers (200 and 201), and bolts (199).
2. Bracket to frame nuts (206), spring washers (205),
washers (204), and bolts (195).
3. Bumper to frame nuts (187), spring washers (186),
washers (185), spacers (198) (where used), washers
(196), and bolts (197).
4. Bumper from the vehicle.
5. Brace to bumper nuts (192), spring washers (193),
washers (194), washers (196), and bolts (197).
6. Braces (54).
7. Bracket to bumper nuts (191), spring washers (190),
washers (189), washers (196), and bolts (197).
1^4-j Install or Connect (Figures 20 and 21)
1. Braces to the bumper with bolts (197), washers (196),
washers (194), spring washers (193), and nuts (192).
• Assemble loosely.
2. Bracket to the bumper with bolts (197), washers
(196), washers (189), spring washers (190), and nuts
(191).

P-MODEL BUMPERS

• Assemble loosely.
3. Bumper to the vehicle.
4. Bumper to frame spacers (198) (where used), spring
washers (186), washers (185), bolts (197), washers
(196), and nuts (187).
Tighten
• Nuts to 47 N«m (35 ft. lbs.).
5. Brackets to the frame rails with bolts (195), washers
(204), spring washers (205), and nuts (206).
Tighten
• Bracket to frame nuts to 95 N*m (70 ft. lbs.).
• Bracket to bumper nuts to 47 N*m (35 ft. lbs.).
6. Braces to the frame rails with bolts (199), washers
(200 and 201), spring washers (202), and nuts (203).
| ^ | Tighten
• Brace to frame nuts to 85 N*m (63 ft. lbs.).
• Brace to bumper nuts to 47 N*m (35 ft. lbs.).