Panasonic WJ-ND300A/G Setup Instructions page 12

Screenshot 6
The "Local Area Connection Properties" window will be
displayed.
Screenshot 7
The "Properties" window of "Internet Protocol (TCP/IP)"
will be displayed.
12
Step 6
Click "Internet Protocol (TCP/IP)", and then click
"Properties".
Step 7
Click "Use the following IP address" and enter the IP
address and the subnet mask as follows;
• IP address: 192.168.1.100
• Subnet mask: 255.255.255.0
Depending on the network configuration, it may be nec-
essary to set the "Default gateway". Refer to a system
administrator for further information.
Step 8
Click the "OK" button and close the window.