Font Number
0 to 104; 0
You can set the default font typeface for this printer function using the corresponding font
numbers.
For typeface samples for each font number, see "Typeface Samples," on p. 6-20.
IMPORTANT
This setting is available for PCL5 printing only. PCL6 printing is not supported.
Point Size
4.00 to 999.75 point (in increments of 0.25 point); 12.00
This setting enables you to specify the point size for the default font.
IMPORTANT
This setting is available for PCL5 printing only. PCL6 printing is not supported.
NOTE
• This setting is available if a value from '1' to '78' is specified for the 'Font Number'
option.
• Holding down [ ] or [ ] makes the values change faster.
Pitch
0.44 to 99.99 cpi (in increments of 0.01 cpi); 10.00
This setting enables you to specify the pitch for the default font.
IMPORTANT
This setting is available for PCL5 printing only. PCL6 printing is not supported.
NOTE
• This setting is available if a value of '0' or from '79' to '104' is specified for the 'Font
Number' option.
• Holding down [ ] or [ ] makes the values change faster.
4-21
PCL Settings
4