Quick Installation
Connect either DVI, HDMI or DisplayPort Video Source from the monitor to the computer.
1.
Make sure both monitor and computer are powered OFF. Please note. The monitor ships
with HDMI and DisplayPort cable. DVI-dual link cable may be sourced separately from a
cable supplier.
2.
Connect the earphone to the earphone output terminal of the monitor. (Earphone may be
sourced separately from a earphone supplier.)
3.
Connect power cord to a properly grounded AC outlet, and then to the monitor.
4.
Power-ON computer and then POWER-ON the monitor.
5.
Set the timing mode on your computer. Recommended resolution and refresh rate is
2560 x 1440 @ 60Hz.
Figure:
Earphone
(not supplied)
PC
DVI cable
(not supplied)
HDMI cable
DisplayPort cable
9
Power cable