Dell Studio XPS 435 MT Service Manual page 31

Processor Cache L3
Memory Installed
Memory Available
Memory Speed
Memory Technology
Standard CMOS Features
Sytem Time
System Date
SATA0
SATA1
SATA2
SATA3
eSATA
Advanced BIOS Features
CPU Feature
USB Device Setting
Advanced Chipset Features
SATA Mode
Onboard Audio Controller
Onboard LAN Controller
Onboard LAN Boot ROM
1394 Controller
Boot Device Configuration
Boot Settings Configuration
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Power Management Setup
ACPI Suspend Type
Remote Wake Up
AC Recovery
Auto Power On
Auto Power On Date
Auto Power On Time
Displays the processor L3 cache size.
Indicates the amount of installed memory in MB.
Indicates the amount of memory available in MB.
Indicates the memory speed in MHz.
Indicates the memory technology; DDR3.
Displays current time in hh:mm:ss format.
Displays the current date in mm:dd:yy format.
Displays the SATA0 drive intergrated in the computer.
Displays the SATA1 drive intergrated in the computer.
Displays the SATA2 drive intergrated in the computer.
Displays the SATA3 drive intergrated in the computer.
Displays the eSATA drive intergrated in the computer.
Limit CPUID Value — Enabled or Disabled (Disabled by default)
l
®
Intel Virtualization Tech — Enabled or Disabled (Enabled by default)
l
Execute Disable Bit — Enabled or Disabled (Enabled by default)
l
Hyper-Threading — Enabled or Disabled (Enabled by default)
l
Multiple CPU Core — All or 1 or 2 (All by default)
l
Intel SpeedStep™ Tech — Enabled or Disabled (Enabled by default)
l
USB Controller — Enabled or Disabled (Enabled by default)
l
USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)
l
IDE; RAID (IDE by default)
Enabled or Disabled (Enabled by default)
Enabled or Disabled (Enabled by default)
Enabled or Disabled (Disabled by default)
Enabled or Disabled (Enabled by default)
Configures the settings during system boot.
Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected.
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (Removable by default).
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default).
Specifies the boot sequence from the available devices.
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).
No; Yes (Yes by default).
Specifies the ACPI suspend type. The default is S3.
This option turns on the computer when a user tries to access the computer through the LAN. The default is Enabled.
Specifies the behaviour of the computer after recovering from a power loss.
On — The computer turns on after it recovers from a power failure.
¡
Off — The computer remains turned off. This is the default state.
¡
Last — The computer returns to the power state it was in before the power failure.
¡
Enables you to set an alarm to turn on the computer automatically.
Enables you to set a date to turn on the computer automatically.
Enables you to set a time to turn on the computer automatically.