Dell Studio XPS 435 MT Service Manual page 24

1 cutouts (2) 2 memory module
3 notch 4 tab on the memory module connector
CAUTION: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of
the module.
8. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
9. Replace the computer cover (see
10. Connect your computer and devices to electrical outlets, and then turn them on.
11. If a message appears stating that memory size has changed, press <F1> to continue.
12. Log on to your computer.
13. Right-click the My Computer icon on your Microsoft
14. Click the General tab.
15. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Back to Contents Page
Replacing the Computer Cover).
® ®
Windows desktop and click Properties.