Yamaha Phazer PZ50Y Owner's Manual page 18

Control functions
a digital speedometer (which shows the
G
riding speed)
an odometer (which shows the total dis-
G
tance traveled)
a tripmeter (which shows the distance trav-
G
eled since it was last set to zero)
an engine speed meter (which shows the
G
engine speed; not for use while riding)
warning indicators (which show self-diag-
G
nosis, coolant temperature, fuel level, and
oil level warnings)
indicator lights [which show high beam, low
G
coolant temperature, transmission position
(PZ50RT / PZ50GT / PZ50MT / PZ50VT),
and knock control system conditions]
a warning light (which shows warnings to-
G
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
G
ing in the fuel tank)
a grip/thumb warmer level indicator (which
G
shows the grip warmer or the thumb warm-
er level)
When the key is turned to the on position, the
warning light, the low coolant temperature in-
dicator light, the knock control system "KCS"
indicator light, the drive "D" and reverse "R" in-
dicator lights (PZ50RT / PZ50GT / PZ50MT /
PZ50VT), and all segments of the meter dis-
play come on and go off.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
12
1. Warning light "
2. Low coolant temperature indicator
light " "
3. Knock control system "KCS" indicator light
4. Drive "D" indicator light (PZ50RT /
PZ50GT / PZ50MT / PZ50VT)
5. Reverse "R" indicator light (PZ50RT /
PZ50GT / PZ50MT / PZ50VT)
6. Meter display
Odometer, tripmeter, and engine
speed meter modes
Pushing the "SELECT" button switches the
display between the odometer mode "ODO",
tripmeter mode "TRIP", and engine speed
meter mode "r/min".
To reset the tripmeter, push the "RESET" but-
ton for at least 1 second while the tripmeter is
displayed.
1. "SELECT" button
2. "RESET" button
"