Panasonic KX-TES824 Features Manual page 203

Fixed Button (KX-T7730/KX-T7735)
Entering System Programming Mode
Using a PT to perform system programming allows an authorised administrator to set a wide range of PBX
features and parameters. To enter system programming mode, the system password is required. With the
system password, all system programming is accessible.
Note
means default value throughout these programming instructions.
Entering Manager Programming Mode
Using a PT to perform manager programming allows the manager extension (extension jack 01) to set
certain PBX features and parameters. To enter manager programming mode, the extension password for
the manager (manager password) is required.
With the manager password, the following 4 system programming settings are accessible:
• System Speed Dialling Number [001]
• System Speed Dialling Name [011]
• DISA Security Code [512]
• DISA Security Code Digits [530]
Notes
• The system password may be entered instead of the manager password.
• With the manager password, the manager can also set a password to each extension, print out call
log information for each extension, and programme call charges. For more information on how to
assign a password to each extension including the manager password and to print out call log
information for each extension, refer to the User Manual (
Programming Mode, 3.2.2 Changing Call Logs and Call Charges).
System Password for
#
Administrator—for PT Programming
Extension Password for Manager
#
—for PT Programming
1234
3.3 PT Programming
Function
FLASH
CLEAR
Programming No.
3 digits
Programming No.
3 digits
2.1.7 Changing System Settings Using
Feature Guide 203