Panasonic KX-TES824 Features Manual page 155

Section Number
(5) Dial number
(6) Duration
(7) Code
Data
[Outside (CO) Line Call]
Outgoing Outside (CO) Line Call
Shows the dialled telephone number
follows:
0 through 9,
F/: Flash/recall signal (
=: Host PBX Access code marker (
Access Code (Access Code to the Telephone Company from
a Host PBX)) The marker is displayed between the Host PBX
Access code and the dialled number when a Host PBX Access
code is entered.
. (dot): Secret Dialling
Incoming Outside (CO) Line Call
Shows <incoming> + the caller's telephone number (max. 16
digits). A caller's telephone number is displayed only when an
optional Caller ID card is installed and "With CID" is selected
in Caller ID SMDR Format [906]. It is also possible to show a
caller's telephone number before the call is answered (
Caller ID SMDR Printout [907]).
Also shows the following codes:
<DISA incoming>: Incoming outside (CO) line call via the
DISA feature
<BV incoming>: Incoming outside (CO) line call to the
common message area of the BV feature
<DIL incoming>: Incoming outside (CO) line call via the DIL
feature (
<UCD waiting>: Incoming outside (CO) line call via the UCD
feature (
When the UCD waiting call is answered, a new record is
started.
Shows the duration of the outside (CO) line call or the UCD call
waiting time in hours/minutes/seconds.
Shows the account code appended to the call (
Account Code Entry), the account code index number (e.g.,
13), the number of the extension that used the Walking COS
feature (e.g., 101), or DISA security code status (e.g., 0).
0: A DISA incoming call without a DISA security code
1 to 4: A DISA incoming call with a DISA security code number
Actual DISA security codes are not printed by SMDR (
Security Code [512]).
1.20 Administrative Information Features
Description
, #, - (hyphen)
1.10.6 Flash/Recall)
1.1.1.1 Direct In Line (DIL))
1.2.2 Uniform Call Distribution (UCD))
*1
. Digits shown are as
1.5.2.8 Host PBX
1.5.2.3
DISA
Feature Guide 155