Instruction book
3.21 Calling up/modifying flow switch function
Description
The flow switch monitors the compressed air flow through the dryer. If the function is active and when no
flow is detected, the controller stops the dryer. The controller will restart the dryer when air flows through
the dryer.
If the flow switch is not active, the dryer keeps running independently from the air flow.
Calling up/modifying flow switch function
Starting from the Main screen, press arrow key (12) until <P. 9> is shown and then press Enter key (13): the
actual flow switch setting is shown: <StOP> (flow switch function is active) or <OFF> (flow switch function
is not active).
Press Enter key (13) to modify this value (a password may be required), the value starts blinking. Use arrow
keys (12) to modify the setting.
Press Enter key (13) to program the new value and use Escape key (14) to return to the parameter screen.
3.22 Test screens
Display test
Starting from the Main screen, press Scroll buttons (12) until <t. 1> is shown and then press Enter button (13).
2920 7103 90
The option <StbY> is not used and has therefore the same result as selecting <OFF>.
The flow switch is active
The flow switch is not active
33