Main Screen; Scrolling Through All Screens - Quincy Compressor QED-300 Instruction Book

3.4

Main screen

Main screen
When the voltage is switched on, the first screen is a test screen. The next screen is the main screen, shown
automatically:
In above image, the screen shows:
• The dryer status (the icon is rotating when the dryer compressor is running, standing still when stopped).
• The dew point temperature (3 °C/37.4 °F) with the dew point icon.
If certain other options are active, e.g. Energy efficient mode activated (see section
dryer regulation
3.5

Scrolling through all screens

Scroll buttons
Scroll buttons (12) can be used to scroll through all screens. The screens are divided into register screens,
measured data screens, digital input screens (numbered as <d. in>, <d. 1>, ...), parameter screens (numbered
as <P. 1>, <P. 2>, ...), protections screens (numbered as <Pr. 1>,...) and test screens (numbered as <t. 1>,...).
During scrolling, the numbers of the screens appear in a consecutive order. For most screens, the unit of
measurement and the related pictograph are shown together with the screen number.
The screen shows the screen number <d. 1>, the unit used <hrs> and the related icon (operation). Press Enter
key (13) to call up the number of operating hours.
20
Main screen, basic indications
mode), the main screen may also display the corresponding icons (see section
Just after starting, the timer icon is displayed during a programmed time. After this period,
the timer icon disappears again.
Example (operating hours)
Instruction book
Calling up/modifying
Icons used).
2920 7103 90