Connecting To Or Disconnecting From A Computer Via Usb - Huawei S7 User Manual

If you need to remove the microSD card while the tablet is on, you
must press the Home key to go to the Home screen and press the
Menu key and then touch Settings > SD card, USB Mass Storage
& tablet storage > Unmount SD card to unmount the storage card
from the tablet and prevent the storage card from getting corrupted or
damaged. You can safely remove the microSD card from your tablet
any time the tablet is turned off.
To remove the microSD card, slightly push the card further into
the slot, and wait for it to ejects out for about 2 mm, and then
remove it.
1.16 Connecting to or disconnecting from a
computer via USB
Before connecting your tablet to a computer via USB, ensure that the
USB debugging on your tablet is enabled, and the USB driver for
tablet has been correctly installed on the computer. You must
download and install the USB driver on the computer for the first time
that you connecting your tablet to the computer via USB.
Touch Settings > Applications > Development > USB
debugging and make USB debugging checked to enable the
USB debugging.
You can download the USB driver at the Service Center of the
web site http://www.huaweidevice.com/worldwide, opening
Software of Download category and searching for the S7
USB driver by entering the keyword S7 .
To connect your tablet to a computer via USB, do as follows.
16