Brother DCP-9010CN Network User's Manual page 27

Configuring your machine for a network
c
Double-click the unconfigured device.
®
Windows
Note
• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and MAC Address (Ethernet Address) by printing the Network Configuration
List.
See Printing the Network Configuration List on page 80.
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Macintosh
Macintosh
2
16