Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available
Wi-Fi connections, then displays them on screen.
1. Touch the top of the screen and swipe downward.
The Status Details displays.
2. Touch Wi-Fi to turn Wi-Fi On.
Your device automatically scans for available Wireless
Access Points.
3. When the scan is complete, touch a Wi-Fi network to
connect.
If the Wi-Fi network is open, your device automatically
connects.
If the Wi-Fi network is secured, enter the password at
the prompt to connect.
Adding a Wi-Fi Network Manually
1. From a Home screen, touch
Wi-Fi.
2. Touch the OFF / ON icon
119
Apps
Settings
to turn Wi-Fi on.
3. Touch Add Wi-Fi network, then enter network
information:
• Network SSID: Enter the name of the Wi-Fi Wireless Access
Point (WAP).
• Security: Select a security option. This must match the current
security setting on your target WAP. Options are: None, WEP,
WPA/WPA2 PSK, or 802.1x EAP.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
• Password: If the WAP is secured, enter the password or hex
key.
4. Touch Save to save the settings.
Note: The next time your phone connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your phone back to its factory default settings.