Samsung SCX-465 Series User Manual page 186

Scan features
Scanning from network connected machine
Network model only (see "Features by models" on page 7).
1 Make sure that your machine is connected to a network.
2 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 49).
3 Start Applications and click Image Capture.
4 According to OS, follow steps below.
• For 10.4
- Click Devices > Browse Devices on Menu bar.
- Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked.
- Click Connect.
If a warning message appears, click Change Port.. to select port,
or If TWAIN UI appears, click Change Port.. from the Preference
tab and select a new port.
• For 10.5
- Click Devices > Browse Devices on Menu bar.
- Make sure that Connected checkbox is checked beside your
machine in Bonjour Devices.
- If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
• For 10.6 -10.9, select your device below SHARED.
5 Set the scan options on this program.
Scan and save your scanned image.
6
• If scanning does not operate in Image Capture, update Mac OS to the
latest version. Image Capture operates properly Mac OS X 10.4.7 or
higher.
• For more information, refer to the
• You can also scan using TWAIN-compliant software, such as Adobe
Photoshop.
• You can scan using Samsung Scan Assistant software. Open the
Applications folder > Samsung folder > Samsung Scan
Image Capture's help.
Assistant.
4. Special Features
187