Advertisement
Motherboards - MAXIMUS VII FORMULA - ASUS
Form Factor
Note
6 von 7
ROG Mem TweakIt
Kaspersky® Anti-Virus
DAEMON Tools Pro Standard
ASUS WebStorage
HomeCloud
ASUS Utilities
ATX Form Factor
12 inch x 9.6 inch ( 30.5 cm x 24.4 cm )
1. The PCIe 2.0 x 16 slot (PCIEX4_3) shares bandwidth with
SATAExpress_E1 connector. The default setting is in Auto mode that
automatically optimizes the system bandwidth. If you install PCIe
2.0 x4 device, the system will automatically detect and disable
SATAExpress_E1 connector.
2. The mPCIe slot is on mPCIe Combo III card and pre-installed with
a Wi-Fi/Bluetooth module.
3. The functions support depends on the CPU types.
4. These SATA ports are for data hard drives only. ATAPI devices are
not supported.
5. Support ASUS USB 3.0 Boost, UASP standard on the Intel native
USB 3.0 is only supported under Windows® 8.1/8.
6. 2 x USB2.0 port at mid-board shares with ROG extension
(ROG_EXT) port.
7. Supports G1/4" threaded fittings. Fittings require separate
purchase.
8. Chassis must conform to ATX specification for successful
installation: brass stand-offs of at least 6mm are required.
http://www.asus.com/Motherboards/MAXIMUS_VII_FORMULA/spec...
18.09.2014 09:41
Advertisement
