Childproof Lock; Body And Control Panel; Maintenance And Cleaning; Detergent Drawer - Beko WMI 71241 Owner's Manual

suitable. The door locked symbol will light up until
the door is suitable for opening. This symbol will
fade out as soon as the door is allowed to open.
Laundry may be added / taken out by opening the
door.
Door lock
The Door Locked Symbol lights up when the
loading door is locked. This symbol will flash until
the door is allowed to open. Do not force the door
at this stage. This symbol will fade out as soon as
the door is allowed to open. You may open the
door after the symbol fades out.
Child-proof lock
Protect the appliance from being tampered by
children by means of the child-proof lock. In this
case, no change can be made in the running
program.
Your machine can be turned on and off with
C
On/Off button while the child-proof lock is
activated. In this case, your machine will
resume its program with child-proof lock
activated.
The machine is switched to child-lock by pressing
the 2nd and 4th auxiliary functions for 3 sec.
"C:on" (Child-proof lock is activated) label appears
on the display.
The same symbol will also be displayed whenever
any button is pressed while the machine is child-
locked.
To deactivate the child-proof lock, press the 2nd
and 4th auxiliary function buttons for 3 sec.
"C:OFF" (Child-proof lock is deactivated) label
appears on the screen.
Ending the program through canceling
"Start/Pause/Cancel" button (Figure 2-10) is
pressed for 3 seconds to cancel the program.
Start symbol (Figure 3-7j) will flash during
cancellation. After cancellation, the symbol of the
corresponding step at which the cancellation was
made will remain lit and "End" will appear on the
screen.
End of program
When the program is finished, the symbols of the
relevant steps will remain lit up and the auxiliary
function, spin and temperature data selected at
the start-up of the program will remain selected.
"End" will appear on the display.
Downloaded From WashingMachine-Manual.com Manuals

5 Maintenance and cleaning

Detergent Drawer

Remove any powder residue buildup in the drawer.
To do this;
1. You can remove the detergent drawer by
pulling it towards yourself strongly.
If more than a normal amount of softener and
C
liquid detergent mixture starts to remain in the
softener compartment, the siphon must be
cleaned.
2. Wash the drawer and the siphon with plenty
of lukewarm water in a washbasin. Wear
protective gloves or use an appropriate brush
to avoid touching the residues in the drawer
when cleaning.
3. Replace the drawer into its housing after
cleaning. Check if the siphon is in its original
location.

The loading door and the drum

After each wash:
• Check if there are any foreign substances in
the drum.
• Open the hole in the bellow with the aid of a
toothpick if it is clogged.
Foreign metal substances in your machine
C
can cause rust stains. In such cases:
Clean the drum with a stainless steel cleaning
agent. Never use steel wool or wire wool.

Body and control panel

When necessary:
• Wipe the exterior panels of your machine with
soapy water or mild detergent. Dry it with a
soft cloth.
• Use only a soft and damp cloth to clean the
control panel.
11 - EN
2
1
3
4