Related Manuals for Beko WMI 81241
Summary of Contents for Beko WMI 81241
- Page 1 Washing Machine User Manual WMI 81241 Document Number= 2820525027_EN / 19-11-15.(14:48)
- Page 2 This product was manufactured using the latest technology in environmentally friendly conditions.
-
Page 3: Important Instructions For Safety And Environment
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of perso- nal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children of less than 3 years... -
Page 4: Intended Use
• If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. • Place the product on a rigid, flat and level surface. • Do not place it on a long-pile rug or similar surfaces. • Do not place the product on a high platform or near the edge on a cascaded sur- face. • Do not place the product on the power cable. • Never use sponge or scrub materials. These will damage the painted, chrome plated and plastic surfaces. 1.2 Intended use • This product has been designed for domestic use. It is not suitable for commer- cial use and it must not be used out of its intended use. • The product must only be used for washing and rinsing of laundry that are mar- ked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or trans- portation. 1.3 Children's safety • Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children. • Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product. • Do not forget to close the loading door when leaving the room where the product is located. -
Page 5: Disposing Of The Waste Product
1.5 Disposing of the waste product • This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Therefore, do not dispose the pro- duct with normal domestic waste at the end of its service life. Take it to a collec- tion point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the envi- ronment and natural resources by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product. -
Page 6: Installation
2 Installation 2. Remove transportation safety bolts by turning them gently. Refer to the nearest Authorised Service Agent for installation 3. Attach the plastic covers supplied in the User Manual bag of the product. To make the product ready for use, review into the holes on the rear panel. (P) the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have... -
Page 7: Connecting To The Drain
points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use. 2.5 Connecting to the drain • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. Your house will be flooded if the hose comes warning out of its housing during water discharge. Moreover, there Do not use any tools to loosen the lock nuts. - Page 8 3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature. To prepare the product for washing laundry, perform first • Always obey the instructions given on the garment tags. operation in Drum Cleaning programme. If your product 3.2 Preparing laundry for washing is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods • Laundry items with metal attachments such as,...
-
Page 9: Using Detergent And Softener
(II) Main Wash Compartment The loading door is locked while a programme is running. Before starting the washing Programme, put powder The door can only be opened a while after the programme detergent into the left compartment with number “II”. Use comes to an end. the detergent manufacturer’s measuring cup and follow the In case of misplacing the laundry, noise and warning instructions on the package. Powder bleach/stain remover vibration problems may occur in the machine. must also be put into this compartment. 3.7 Using detergent and softener Put the liquid detergent into the main wash compartment with number “II ” before starting the washing Programme. -
Page 10: Tips For Efficient Washing
in water from the detergent drawer in the first rinsing step. Bleach should not be mixed with detergent. Since the bleach may cause irritation on skin, little amounts must be used and rinsed thoroughly. Do not pour bleach directly onto the laundry and do not use it with colour laundry. When using oxygen based bleach, follow the instructions on the package and select a Programme at low temperature. Oxygen based bleach can be used together with the detergent. However, if it is not at the same thickness with the detergent, then it must be added from the compartment number “II” right after the detergent foams with water. Eliminating lime formation • When required, use only appropriate lime removers developed specifically for washing machines and always follow the instructions on the package. -
Page 11: Operating The Product
4 Operating the product 4.1 Control panel 1 - Spin Speed Adjustment button 5 - On / Off button 2 - Display 6 - Delayed Start buttons (+ / -) 3 - Temperature Adjustment button 7 - Auxiliary Function buttons 4 - Programme Selection knob 8 - Start / Pause / Cancel button Indicative values for Synthetics programmes (EN) Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** ≤ 1000 rpm > 1000 rpm 1.00 /120 Synthetics 60 0.45 /100 Synthetics 40 * You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. ** Remaining moisture content values may differ according to the selected spin speed. - Page 12 4.2 Display symbols 4.5 Main programmes Depending on the type of fabric, use the following main programmes. • Хлопок (Cottons) Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle. • Синтетика (Synthetics) Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions selected. As their meshed texture causes excessive foaming, wash the veils/ tulle by putting little amount of detergent into the main a - Spin Speed indicator...
-
Page 13: Special Programmes
• Темные вещи (Darkcare) 4.8 Temperature selection Use this programme to wash your dark coloured laundry Whenever a new programme is selected, the maximum or the laundry that you do not want it get faded. Washing temperature for the selected programme appears on the is performed with little mechanic action and at low temperature indicator. -
Page 14: Programme And Consumption Table
4.10 Programme and consumption table Auxiliary functions Selectable Programme (°C) temperature range °C Хлопок Эко 60** 1.36 1200 • • • • 60-Cold 1200 • • • • 90-Cold Хлопок 1200 • • • • 90-Cold 0.95 1200 • • •... - Page 15 4.11 Auxiliary function selection Delayed start With the Delayed Start function the startup of the Select the desired auxiliary functions before starting programme may be delayed up to 24 hours. Delayed start the programme. Furthermore, you may also select or time can be increased by increments of 30 minutes. cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button Do not use liquid detergents when you set Delayed when the machine is operating. For this, the machine must Start! There is the risk of staining of the clothes. be in a step before the auxiliary function you are going to Open the loading door, place the laundry and put detergent, select or cancel.
-
Page 16: Loading Door Lock
4.17 Child Lock Main Wash Main Wash symbol indicating that the main wash step has Use Child Lock function to prevent children from tampering started appears on the display. with the machine. Thus you can avoid any changes in a Rinse running programme. Rinse symbol indicating that the rinsing step has started You can switch on and off the machine with On / Off appears on the display. button when the Child Lock is active. When you switch Softener on the machine again, programme will resume from Softener symbol indicating that the softener step has started where it has stopped. -
Page 17: Maintenance And Cleaning
5 Maintenance and cleaning 4.21 Your machine is equipped with a “Standby Mode” Service life of the product extends and frequently faced In case of not starting any programme or waiting without problems decrease if cleaned at regular intervals. making any other operation when the machine is turned 5.1 Cleaning the detergent drawer on by On/Off button and while it is in selection step or if Remove any powder residue buildup in the drawer. To do no other operation is performed approximately 2 minutes this; after the programme you selected has come to an end, your machine will automatically switch to energy saving mode. Brightness of indicator lights will decrease. Also, if your product is equipped with a display showing the... -
Page 18: Cleaning The Body And Control Panel
5.5 Draining remaining water and After every washing make sure that no foreign substance is left in the drum. cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. -
Page 19: Technical Specifications
6 Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WMI 81241 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Maximum spin speed (rpm) 1200 Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) 230 V / 50Hz Total current (A) Total power (W) 2200 Main model code 8811 Class Degree of protection... -
Page 20: Troubleshooting
7 Troubleshooting Program does not start after closing the door. • Start / Pause / Cancel button was not pressed. >>> *Press the Start / Pause / Cancel button. Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. - Page 21 21 / EN Washing Machine / User’s Manual...
- Page 22 22 / EN Washing Machine / User’s Manual...
- Page 23 23 / EN Washing Machine / User’s Manual...
- Page 24 www.beko.com...