Net; Connections - D-Link DSL-2500U User Manual

DSL-2500U ADSL/Ethernet Router
User Manual

Net

In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).

Connections

On the Net / Connections page, you can create and edit connections used by the router.
By default, the LAN connection is configured in the system. It corresponds to the local interface of
the router (br0). You cannot delete this connection.
To create a new connection, click the Add button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the Save button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed,
click the Delete button.
To use one of existing WAN connections as a default gateway, select the choice of the Default
gateway radio button located in the line corresponding to this connection.
Figure 18. The Net / Connections page.
Page 23 of 63
Configuring via Web-based Interface