Connecting To Pc (In Os Windows Xp); Pc With Ethernet Adapter; Obtaining Ip Address Automatically - D-Link DSL-2500U User Manual

DSL-2500U ADSL/Ethernet Router
User Manual

Connecting to PC (in OS Windows XP)

PC with Ethernet Adapter

1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between the Ethernet port located on the back panel of the router
and the Ethernet port of your PC.
3. Connect a phone cable between the DSL port of the router and the ADSL OUT port of the
splitter. Connect your phone to the PHONE port of the splitter. Then connect another phone
cable between a phone jack and the ADSL IN port of the splitter.
4. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
5. Turn on your PC and wait until your operating system is completely loaded.

Obtaining IP Address Automatically

1. Click the Start button and proceed to the Control Panel > Network and Internet
Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
Figure 3. The Network Connections window.
Page 12 of 63
Installation and Connection