Technics SX-PR50V User Manual page 46

PartVII
MIDI
MIDICLOCK
Select whether this instrument's RHYTHM and
SEQUENCER performance is controlled by the
internal clock or by the clock of the connected
instrument.
1. Use the MIDI button to select OTHERS.
2. Use the MIDI CLOCK button to select the in-
ternal clock or external clock.
0
On (indicator is lit): This instrument's RHYTHM
and SEQUENCER performance is controlled by
the connected instrument's clock. In this case,
"E::J"
is shown on the display.
Off (indicator is not lit): This instrument's
RHYTHM and SEQUENCER performance is con-
trolled by the internal clock, not by the connected
instrument's clock.
:;r
SONGSELECT
Specify whether or not song number data is trans-
mitted/received.
1. Use the MIDI button ~o select OTHERS.
2. Use the SONG SELECT button to specify
w\\et\\ef Of not song numbef data can be ex-
changed.
0
COUNT &FILL IN INTRO &ENDING
0 0
SYNCHRO
START
0
0
START!
STOP
0
STAAT/STOP
\.
(
WIOllOAO
ECT WID' ClOC-
On (indicator is lit): Song number data can be ex-
changed.
O" ~indicatOfis not \it): Song number data cannot
be exchanged.
MIDILOAD
When loading data from a memory disk into this
instrument's memory, specify whether or not the
.
stored MIDI settings are also recalled.
1. Use the MIDI button to select OTHERS.
2. Use the MIDI LOAD button to specify whether
or not the stored MIDI settings are recalled.
0
On (indicator is lit): The stored MIDI settings are
recalled when loading data from a memory disk.
Off (indicator is not lit): The stored MIDI settings
are not recalled.
45
COUNT&FILLIN INTI'IO&ENDING SYNCHRO
0 0
START
0 0
0
I
STAR"
,-...,
STOP
WlOllOAO SONGSELECT
r{ ""XC- STAATISTO-
COUNT&FILLIN
INTRO&ENDING SYNCHRO
0 0
START
0
0
I
START!
0 STOP
SONGSELECT WIOI C lOC-
STAAT/STOP
J