Technics SX-PR50V User Manual page 25

PartIII
Recordingand playback
3. Press the START/STOP button to turn it on.
The 8 BEAT rhythm begins to play. Play the
BASS part in time with the rhythm.
8
START!
STOP
ll!IWffi!!
.
If you make an error in playing, you can erase
the part and redo it from the beginning. (Refer
to page 25.)
.
You can record at a slow tempo and play back
at a fast tempo. The pitch does not change.
~
4. When you have finished playing the BASS part,
press the SEQUENCER REC button to turn it
off.
5. Press the SEQUENCER REC button to turn it
on, and then press the buttonJor the next part
to record, for example RIGHT.
,1/ ,1/ ,1/
- 8,ffiJUENCER-
0
RIGHT
0
LEFT
- 8..e>'ss OACCOMP
11OACCOMP
2
"8"~ CD'cD
CD
CD
.
The indicator flashes slowly to show that the
RIGHT part is now in the recording mode.
.
The sounds and effects for the RIGHT part can
be stored at this time.
.
The RIGHT and LEFT parts of a split keyboard
can be stored at the same time. Press the
RIGHT and LEFT buttons so that both their
indicators are flashing slowly.
6. Press the START/STOP button. The BASS
part you recorded first begins to play. Play the
right-hand part in time with this.
,1/
-8-
~,
START!
STOP
~
7. When you have finished playing the RIGHT
part, press the SEQUENCERREC button to
turn it off.
8. Record the other parts of the performance by
repeating steps 5-7.
9. When all the parts have been recorded, press
the SEQUENCER REC button to turn it off.
,,1/ ,1/ ,1/ ,1/
OSEOUENCEfl-
/
8ftt6HT -8t:ffT -
/
8e.oss-8J;et:OMP-1/0ACCOMP2
REG I' /1' I" / I 'CHORD
CJCTICDCDCDCD
0
. If you perform the storage procedures for a
part which has already been stored, the pre-
viously stored data is erased and the new data
is stored.
. You can save your recorded performances
using the Digital Disk Recorder to make your
own performance album. (Refer to page 33.)
24