Technics SX-PR50V User Manual page 34

PartV
External m emory
Saving a performance
1. Store the performance in the SEQUENCER.
This is the data which is going to be saved in
the memory disk.
2. Insert a memory disk into the slot of the Digital
Disk Recorder.
3. Press the SAVE button.
"':~.4;AVE
/'D
4. Assign a song number to the tune you are
storing by using the TRANSPOSE/PROGRAM
buttons (1-20).
MUSICAL DISPLAY
,- "
I.LI
I
I
T.'NSPOSE,
0 '.00 0
OOWNW
r)
D
.
If you specify a song number which is already
used, the song number flashes on the display.
In this case, if you wish to keep the previously
stored song, specify a different (unused) num-
ber for the new song.
5. Press the EXECUTE button.
-~--EXECUTE
/1'
SEQUENCER
-
r---I
RESET
L J
[
,-
I.
.
..
S . " appears on the display while the data
is being saved. When the indication goes out,
data saving is completed and you can now
remove the memory disk from the Digital Disk
Recorder.
Loading t hestoredperformance
1. Insert the memory disk into the slot of the
Digital Disk Recorder.
2. Press the LOAD button.
,1/
-84.0AD
/10
3. Use the TRANSPOSE/PROGRAM buttons to
specify the number of the tune you wish to
load.
MUSICAL DISPLAY
, "
L.LI
I
I
T..NSPOSE/
0 '.00 0
0(1
.
If no song is stored in the number you specified,
the song number flashes on the display. In this
case, specify a number in which a song has
been stored.
4. Press the EXECUTE button.
~.~XECUTE
/1'
SEQUENCER
- r-I
RESET
L J
[
L.
.
..
L ." appearson the display while the data is
being loaded. When the indication goes out,
data loading is completed and you can now
remove the memory disk from the Digital Disk
Recorder.
.
The LOAD procedure causes any data which
is currently stored in the SEQUENCER
memory to be erased.
5. Press the START/STOP button. The loaded
performance begins to play automatically.
33