Sound Adjustment - Panasonic SC-PM45 Operating Instructions Manual

To activate the timer
5
Press [˚PLAY] (
South East Asia
on your desired timer.
˚ PLAY
no display (off)
Press [y] to turn off the unit.
6
The unit must be off for the timers to operate.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source
1) Press [
or volume indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings Press [CLOCK/TIMER] repeatedly to select
˚
(when the unit is on
PLAY or
or in standby mode)
cancel Press [˚PLAY] to clear the timer indicators
from the display.
Note
• The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The record timer will start 30 seconds before the set time, with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
activate the equipment's play mode and increase the volume. (See
the portable audio equipment's instruction manual.)
PM45_GN-En_new.indd 13 PM45_GN-En_new.indd 13
: [˚PLAY/REC]) to turn
South East Asia
˚ REC
˚
PLAY] to clear the timer
˚
REC.

Sound adjustment

Selecting sound effects Selecting sound effects
You can change the sound effect by selecting Preset EQ or
adjusting the bass or treble effect.
Preset EQ Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1 Press [BASS/TREBLE] repeatedly to select your
desired setting.
BASS
original display
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [ /4] or [ /¢] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound Enjoying surround sound
Enable you to add natural width and depth to the stereo
sound.
To activate
Press [SURROUND] to display "
To cancel
Press [SURROUND] again to clear "
indicator.
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the surround
sound effect.
TREBLE
" indicator.
"
1/24/07 12:44:29 PM 1/24/07 12:44:29 PM
13