1. Positive battery lead (red)
2. Negative battery lead (black)
3. Install the battery holding plate by installing
the bolts, and then hook the band to secure
the owner's tool kit.
4. Install the seat. (See page 4-11.)
ECB00632
NOTICE
G
Always keep the battery charged. Storing a
discharged battery can cause permanent
battery damage.
G
To charge a VRLA (Valve Regulated Lead Ac-
id) battery, a special (constant-voltage) bat-
tery
charger
is
conventional battery charger will damage
2
required.
Using
a
the battery. If you do not have access to a
constant-voltage battery charger, have a
Yamaha dealer charge your battery.
EBU25242
Replacing the fuse
1. Fuse
2. Spare fuse
The fuse holder is located under the seat. (See
page 4-11.)
If the fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
circuits.
8-39
8