Removing A Wheel - Yamaha YFM350RY Owner's Manual

1. Screw
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
1. Tail/brake light bulb
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
ECB00700
NOTICE
Do not overtighten the screws, otherwise the
lens may break.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
8-43
8