Periodic maintenance and adjustment
Adjusting the clutch free play
The clutch free play must be checked
and, if necessary, adjusted as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
1. Remove
the
screw cover by removing the
screws.
1. Screw
2. Clutch adjusting screw cover
2. Loosen the locknut.
3. Slowly turn the clutch adjusting
screw in direction (a) until resis-
tance is felt, and then turn it 1/8
turn in direction (b).
1. Locknut
2. Clutch adjusting screw
4. Tighten the locknut to the speci-
fied torque.
EAU46252
clutch
adjusting
7-16
Tightening torque:
Locknut:
6 Nm (0.6 m·kgf, 4.3 ft·lbf)
TIP
When tightening the locknut, hold the
clutch adjusting screw with a screw-
driver so that it does not turn together
with the locknut.
5. Install the clutch adjusting screw
cover by installing the screws.
7