Replacing An Auxiliary Light Bulb - Yamaha XENTER HW151 Owner's Manual

Periodic maintenance and adjustment
2. Remove the bulb cover, and then
1
disconnect the headlight coupler.
2
3
4
5
1. Headlight bulb cover
6
3. Unhook the headlight bulb holder,
and then remove the burnt-out
7
bulb.
8
9
10
2
11
1. Headlight coupler
12
2. Headlight bulb holder
3. Headlight bulb
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Connect the coupler, and then in-
1
stall the headlight bulb cover.
6. Install the cowling together with
the headlight unit.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
3
Replacing an auxiliary light
bulb
If an auxiliary light bulb burns out, re-
place it as follows.
1. Auxiliary light bulb socket
6-29
1. Remove cowling
page 6-8.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
3. Remove the burnt out bulb by pull-
ing it out.
EAUT3641
A. (See