Toshiba 32AV500U Service Manual page 24

5. Turn on the TV receiver to begin the download as shown below. Do not remove AC
power or interrupt the set during the download progress.
6. Upon completion of the firmware update a "Finished, Please reset the HDTV" banner will
be displayed.
7. To reset, remove AC power to the TV receiver.
8. Reconnect AC power after the reset and confirm the firmware update by checking the
version. (Enter Setup Menu and select "System Status" to verify version.)
9. Firmware update is complete.
10. Perform any necessary service adjustment and safety procedures as defined in the
Toshiba Service Manual.
Product Safety Precautions:
Product Safety Precautions are described in the Toshiba service manual(s) for models covered in this instruction. All safety precautions
and checks shall be complied with before returning the equipment to the customer. Servicers who defeat safety features or fail to
perform safety checks may be liable for any resulting damages and may expose themselves and others to possible injury.
This Service Instruction is intended for use by only Toshiba qualified Authorized Service providers
© 2008 Toshiba America Consumer Products, LLC.
TOSHIBA AMERICA CONSUMER PRODUCTS L.L.C.
1420-B Toshiba Dr.
Lebanon, TN 37087
www.tacp.toshiba.com
23
5