Toshiba 32AV500U Service Manual page 21

5. Select "Setup" from the iDev application.
6. Select the Serial Port of which your USB to Serial Adapter is connected. (Note: when using
the USB to Serial Adapter the Com ports are assigned by the operating system. Identify the
correct COM port using your device manager in windows as reference. The USB to Serial
Adapter must be connected to identify the assigned port)
7. Set the Baud Rate to 115200.
8. Select the BROWSE (...) button to open the image file browser.
Baud Rate
Browse
9. Select the "Firmware update" file (with file extension .ecc) for the TV receiver being updated.
The Firmware update file will be in the directory where you placed the contents from step 3
in the Installation and Setup procedure.
Select Serial Port of which the USB to Serial
Update Boot Sector – Do Not Check box
20
Adapter is connected
2