Makita SA7000C Instruction Manual
Hide thumbs
Also See for SA7000C:
- Instruction manual (65 pages) ,
- Technical information (6 pages) ,
- Instruction manual (49 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita SA7000C
Summary of Contents for Makita SA7000C
- Page 1 INSTRUCTION MANUAL Angle Sander SA7000C 005015 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model SA7000C Disc diameter 180 mm Spindle thread No load speed (n ) / Rated speed (n) 4,000 (min Overall length 453 mm Net weight 3.4 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. -
Page 3: General Power Tool Safety Warnings
Do not use any Makita Corporation responsible adapter plugs with earthed (grounded) power manufacturer declare that the following Makita tools. Unmodified plugs and matching outlets will machine(s): reduce risk of electric shock. Designation of Machine:... - Page 4 GEB036-5 16. Dress properly. Do not wear loose clothing or DISC SANDER SAFETY jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, WARNINGS jewellery or long hair can be caught in moving Safety Warnings Common for Sanding Operation: parts.
- Page 5 capable stopping small abrasive c) Do not position your body in the area where workpiece fragments. The eye protection must power tool will move if kickback occurs. be capable of stopping flying debris generated by Kickback will propel the tool in direction opposite to various operations.
-
Page 6: Functional Description
FUNCTIONAL DESCRIPTION Speed adjusting dial 1. Speed adjusting CAUTION: dial Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Shaft lock 1. Shaft lock 005018 The rotating speed can be changed by turning the speed adjusting dial to a given number setting from 1 to 6 (6 at the time when the switch trigger is fully pulled). -
Page 7: Operation
Installing side grip (handle) To remove the disc, follow the installation procedure in reverse. CAUTION: OPERATION Always be sure that the side grip is installed • securely before operation. Remove one of the screws which secure gear housing and head cover, then screw the side grip on the tool. 005023 WARNING: It should never be necessary to force the tool. -
Page 8: Replacing Carbon Brushes
Only use accessory or attachment for its stated purpose. 005024 Replacing carbon brushes If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. 1. Commutator Rubber pad • 2. Insulating tip Abrasive discs •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884531F221...