Installing And Setting Up The Card; Step 1 Install The Software - Belkin G+ User Manual

Installing and Setting up the Card

Step 1 Install the Software
Important note:
Install the software before inserting the Card.
1.1
Insert the Installation Software CD into your CD-ROM drive.
1.2
The Wireless Networking Utility (WNU) setup screen will automatically
appear (may take 15–20 seconds to appear).
1.3
Click "install" from the menu.
Note:
If the WNU setup screen does not appear within 20 seconds,
access your CD-ROM: double-click on the "My Computer" icon and
then double-click on the CD-ROM drive into which you have placed
the installation CD. Double-click on the folder named "Files", then
double-click on the icon named "setup.exe".
8 8