Silvercrest SKRP 1000 A1 Operating Manual page 8

3. Press the button MODE/LOCK k once
again to save the time and switch to the
date setting.
If you do not press a button for 15 seconds
when making the settings, the appliance
saves the current setting and returns to auto-
matic mode.
Setting the date
1. In automatic mode press the button
MODE/LOCK k twice. In the display
r appears "01.01.2011", the date display
flashes.
2. Press the buttons UP
to set the date at day intervals. Pressing
and holding the buttons changes the date
at intervals of 10 days.
3. Press the button MODE/LOCK k once
again to save the date and to switch to
setting the memory function.
If you later press the DOWN button
automatic mode, the display r briefly shows
"DAY". Subsequently, the time and date dis-
play alternate themselves. To switch back to
an exclusive time display, press the button
DOWN l once again.

Setting the memory functions
You can programme in up to 6 dates, which
the appliance will remind you of when they
are reached.
1. In automatic mode press the button
MODE/LOCK k three times. The display
r shows alternatively a date and the
SDA 1 indicator for reminder date 1.
2. Press the buttons UP
to set the first desired reminder date.
Pressing and holding the buttons changes
the date at intervals of 10 days.
3. Press the button MEM./AMS o and then
use the buttons UP
to set the hour at which the alarm of the
reminder function should sound.
4. When you press the button TIMER s, the
year number is deactivated and thus you
are reminded on this date every year.
/DOWN
 
1(/l
l in

/DOWN
 
1(/l
/DOWN
 
1(/l
5. Should you wish to programme in further
dates, press the button MEM.SCAN a to
select the desired memory positions 2-6.
6. Follow the same steps with the other
dates.
7. To deactivate the memory function, pro-
gramme in a date that lies in the past.
8. Press the button MODE/LOCK k once
again to save the settings of the memory
function and to switch to setting the up-
date function.
Setting the update function
Using this function, the appliance can auto-
matically update the settings for the clock
based on the RDS data. When the radio is
not switched on, this update takes place daily
at 3:00 and 5:00.
1. In automatic mode press the button
MODE/LOCK k four times. The display
r shows "UP DATE".
2. Press the button DOWN
vate the Actual-isation function. The blink-
ing clock symbol
disappears.
3. Press the button UP
update function. The hour symbol
pears.
4. Press the button MODE/LOCK k once
again to save the settings of the update
function and to switch to setting the 12 or
24 hour mode.
Selecting 12 or 24 hour time display
1. In automatic mode press the button
MODE/LOCK k five times. In the display
r appears "24 HOUR" for the 24 hour
modus.
2. Press the button DOWN
12 hour modus. In the display r appears
"12 HOUR". Press the button UP
turn to the 24 hour modus.
In the 12 hour mode "AM" appears between
0:00 and 11:59 (ante meridiem = morn-
ings) behind the time display, from 12:00 to
23:59 "PM" (post meridiem = afternoons) is
shown in the display r.
- 6 -
l, to deacti-

in the display r then
1( to reactivate the

ap-
l to select the

1( to re-
