Appendix; Specifications; Label Types - Oki LD630T User Manual

7. Appendix

7-1 Specifications

Item
Printing Method
Dot Density
Printer
Printing Width
Printing Speed
Paper
Length / Width
Ribbon Type(Outside)
Input Voltage
AC Frequency
Adapter
Output Voltage
Output Current
Temperature
Usage
Conditions
(except for paper)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is for indoor use and all the communication wirings are limited to inside
of the building.
- The switch is the disconnecting device. Turn off switch from any hazard.

7-2 Label Types

The label types used with this printer are as follows.
• Control Labels: PP
• Other Labels: PET
Rev. 1.0
Thermal Transfer / Direct Thermal Printing
LD630T : 203 dpi (8 dot/mm)
LD640T : 300 dpi (11.8 dot/mm)
LD630T : Max. 108 mm (Max. 4.25")
LD640T : Max. 105.7 mm (Max. 4.16")
LD630T : Max. 152 mm/sec (Max. 6ips)
LD640T : Max. 102 mm/sec (Max. 4ips)
20 ~ 112 mm (0.79 ~ 4.41")
Width
Max 130mm (Max. 5.12")
Roll
25.4~38.1mm (1~1.5")
Core
Max 300m (Max. 11.8") / 33 ~ 110mm(1.3~4.33")
Wax, Wax/Resin, Resin
0.5" / 1"
Core
AC 100~240V
50/60 Hz
DC 24V±5%
2.5A
5 ~ 40 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity 10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
Description
- 39 -
LD630T/LD640T