Table of Contents
Advertisement
RAINFALL
Today's rainfall appears on the 1st line of the display
and total rainfall is shown on the 2nd line. Press in /
mm to toggle between inches and millimeters as the
unit of measurement.
RAINFALL HISTORY
The rainfall history is displayed on the 1st line of the
LCD display. The main unit can record up to 9 days of
rainfall.
Use HISTORY to display the record for a particular day.
The day of the record will be displayed with a minus (-)
sign.
Caution: Other sensors using the 433 MHz transmission
frequency may influence the rainfall reading. Please
avoid placing those sensors too close to the unit.
TOTAL RAINFALL
The total rainfall is displayed on the 2nd line of the LCD
display.
To display the commencing date of the total rainfall
record, press SINCE. The date will appear on the 1st
line of the display. Press again to show the commencing
year.
RGR126(R13)-4(final)
To clear the existing commencing date and reset it to
start again, press and hold SINCE. The total rainfall will
now be equal to the today rainfall and the unit will start
again to collect the rainfall data.
RAINFALL ALARM
The rain alarm value can be displayed at any time by
pressing (( • )).
To set the rainfall alarm,
1.
Press and hold (( • )) for two seconds.
2.
Use
3.
Press (( • )) to confirm. The alarm will be activated.
The rain alarm indicator will light up.
The alarm will go off for one minute when the rainfall
reaches the preset value and the rain alarm indicator
will flash. A reminder beep will be emitted every minute.
Once the rain alarm is on the indicator will not stop
flashing unless
changed. To stop the alarm and reminder beep, press
any button or change the rainfall alarm value.
To deactivate the alarm, press
10
10
or
to set the desired value.
is pressed or the rain alarm value is
.
4/6/05, 5:46 PM
Hide quick links:
Advertisement
Table of Contents
