Yamaha TT-R50EE Owner's Manual page 70

PERIODIC MAINTENANCE AND ADJUSTMENT
2. Disconnect the brake cable at the
wheel by removing the brake lever
free play adjusting nut at the brake
camshaft lever, then remove the
cable from the brake camshaft le-
ver.
1. Brake cable
2. Brake camshaft lever
7
3. Brake lever free play adjusting nut
3. Loosen the axle nut.
1
2
1. Axle nut
2. Washer
4. Lift the front wheel off the ground
according to the procedure in the
previous section "Supporting the
motorcycle".
5. Remove the axle nut and washer.
6. Pull the wheel axle out, and then
remove the wheel.
7-27
1. Wheel axle
To install the front wheel
1. Lift the wheel up between the fork
legs.
2. Insert the wheel axle from the
right-hand side.
TIP
Make sure that the slot in the brake
shoe plate fits over the retainer on the
fork leg.