Remote Sensor Scanning; Temperature And Humidity Trend - Oregon Scientific EMR812HGN User Manual

The unit is in searching mode.
Transmission data are securely
registered.
No signals.
THE COMFORT-LEVEL ICONS
The comfort level is based on the recorded relative humidity. An
indicator will be displayed ot show if the level is comfortable, wet or
dry.
Comfort-level

TEMPERATURE AND HUMIDITY TREND

INDICATORS
The temperature-trend and humidity-trend indicators show the trends
of collected readings. Arrows indicate a rising, steady or falling
trend.
Arrow
indicator
Temperature
Rising
Trend
Arrow
indicator
Humidity
Rising
Trend
Note: If the temperature goes above or below the temperature
measuring range of the main unit or the remote unit ( stated in
specification), the display will show "HHH" or "LLL".

REMOTE SENSOR SCANNING

The unit can be set to automatically scan and display readings from
the remote sensors. When the remote-sensor mode is active, the
display will show the readings from one channel for about 4-second
and then proceed to the next channel display.
To activate the remote-sensor scanning mode:
Press and hold CHANNEL for 2-seconds.
6
Steady Falling
Steady Falling