Yamaha FJR1300AS Owner's Manual page 30

INSTRUMENT AND CONTROL FUNCTIONS
●
an average fuel consumption dis-
play
● an instantaneous fuel consump-
tion display
The items shown in each information
display can be selected.
To set or select the items shown, see
page 3-18.
3
Odometer display:
ODO
Tripmeter displays:
TRIP-1
TRIP-2
"TRIP-1" and "TRIP-2" show the dis-
tance traveled since they were last set
to zero.
When approximately 5.5 L (1.45 US
gal, 1.21 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter starts flashing. In addition, the in-
formation display will automatically
change to the fuel reserve tripmeter
mode "TRIP-F" and start counting the
distance traveled from that point.
km
20
km
5.0
In that case, pushing the select switch
switches the display between the vari-
ous information displays in the follow-
ing order;
km
7.0
TRIP-F → Display–1 → Display–2 →
Display–3 → TRIP-F
To reset a tripmeter, use the select
switch to select the information display
that contains the tripmeter. Push the
GEAR
4
TRIP-F km
3.4
3-15
"RESET" button briefly so that the trip-
meter flashes, and then push the "RE-
SET" button again for at least 2
seconds while the tripmeter is flashing.
If you do not reset the fuel reserve trip-
meter manually, it will reset itself auto-
matically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).
Estimated traveling range display:
RANGE
11
The distance that can be traveled with
the remaining fuel in the fuel tank under
the current riding conditions is shown.
Elapsed time display:
TIME TRIP
0:06
The time that has elapsed since the key
was turned to "ON" is shown. The max-
imum time that can be shown is 99:59.
km