Removing And Installing Cowling And Panel - Yamaha XMAX YP250R Owner's Manual

Removing and installing the
cowling and panel
1. Cowling A
2. Panel
1. Panel A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18740 The cowling and panel shown above
need to be removed to perform some
of the maintenance jobs described in
this chapter. Refer to this section
each time a cowling or panel needs to
be removed and installed.
Cowling A
To remove the cowling
1. Remove the panel by pushing it
out from the back side of the
cowling as shown.
1. Panel
2. Push
2. Remove the screws, and then
pull the cowling off as shown.
EAUS1790
1. Cowling A
To install the cowling
1. Place the cowling in the original
2. Install the panel by pushing it in.
Panel A
To remove the panel
Remove the screws, and then pull the
panel outward.
6-8
position, and then install the
screws.
6
EAU47890