Operation And Important Riding Points; Starting The Engine - Yamaha XMAX YP250R Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do
not understand, ask your Yamaha
dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of
control, which could cause an acci-
dent or injury.
5
EAU15951
TIP
This model is equipped with a lean
angle sensor to stop the engine in
case of a turnover. To start the engine
EWA10271
after a turnover, be sure to turn the
main switch to "OFF" and then to
"ON". Failing to do so will prevent the
engine from starting even though the
engine will crank when pushing the
start switch.
EAU45310

Starting the engine

NOTICE
See page 5-4 for engine break-in
instructions prior to operating the
vehicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the sides-
tand must be up.
See page 3-19 for more information.
1. Turn the key to "ON".
G
G
G
G
NOTICE
If a warning light, indicator light or
indicator does not go off, see
pages 3-4, 3-6, 3-8 for the corres-
ponding warning light, indicator
light or indicator circuit check.
5-1
The following warning light, indi-
cator light and indicators should
come on for a few seconds, then
go off.
Engine trouble warning light
Immobilizer system indicator light
V-belt replacement indicator
Oil change indicator
EAUS1650
ECA10250
ECA15022